CH(CS)系列單缸液壓圓錐破碎機設備按重型工況設計，主軸上下兩點支撐，受力條件好。恒定破碎腔設計使襯板磨損周期內給料和生產能力保持恒定，顯著降低運行成本。多達4種的偏心距，使設備的靈活性和舒適性大大增強。配備智能型排礦口調整系統，可使破碎機的性能最大化。口設置有傳統的墊片調整方式、液壓輔助調整方式和楔形塊液壓調整方式。用壓條和支撐條這種快捷的安裝方式將鄂板固定在破碎機上。一些保護性部件的使用，有效地避免主要部件的損壞。降低了設備壽命周期的總成本并提高了作業率。比如在顎板與動顎和定顎間增加了可更換的墊板，在排料口處設置的可更換的支撐條均保護動顎和定顎體免于磨損;軸承座上采用了重型護板，避免軸承座的磨損等。

The CH(CS) single cylinder hydraulic cone crusher is designed for heavy duty applications with two points of support at the top and bottom of the main shaft for good stress conditions. The constant crushing chamber design keeps feed and capacity constant during the liner wear cycle, significantly reducing operating costs. Up to 4 types of eccentric distance make the plant much more flexible and comfortable. Equipped with an intelligent discharge opening adjustment system to maximise the performance of the crusher. The opening settings are available with conventional shim adjustment, hydraulic assisted adjustment and wedge block hydraulic adjustment. The jaw plate is fixed to the crusher with a quick installation method of press bars and support bars. A number of protective components are used to effectively avoid damage to the main components. This reduces the total cost of ownership over the life of the plant and increases the operating rate. For example, replaceable pads are added between the jaw plate and the jaws, replaceable support bars at the discharge opening protect the jaw and jaw body from wear and tear, and heavy duty guards are used on the bearing housing to avoid wear of the bearing housing.Translated with www.DeepL.com/Translator (free version)